Samsung LH008IWJ Series Installation Manual page 83

8. S-BOX Installation and Connection
⑩ Instruction for trimming HDBase-T cable on site.
 Flip the drain wire up onto the RJ-45 connector Flip the drain wire up onto the RJ-45 connector. Clamp the strain relief
down on the purple jacket of the BC-HDKat6a cable using the pair of pliers.
 Solder the drain wire to the metal casing of the RJ-45 connector : Solder the drain wire to the metal casing of the RJ-45
connector and cut off the excess using the wire cutters. Verify the continuity of the conductors and the shield using a cable
tester.
Recommended) Drain wire soldering + Cooper foil
Samsung Electronics