Table of Contents
Advertisement
8. S-BOX Installation and Connection
• S-BOX Connection
① Input the video signal to the S-BOX. (Input terminal : HDMI, DP)
② Check the signal input from SOURCE STATUS.(RED : HDMI1 , GREEN : HDMI2, Blue : DISPLAY PORT)
③ Connect from the HDBT OUT port of S-BOX to HDBT IN port of Interface Gender using LAN cable.
④ Connect from DATA OUT port of Interface Gender to DATA IN port of the first cabinet using OCM Cable.
⑤ When HDMI UHD Color is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported
by S-BOX. When HDMI UHD Color is set to Off, up to 1920 x 1080 @ 60 Hz resolution is supported.
※ Menu – Picture – Advanced Settings – Input Signal Plus : ON
(Default: OFF, S-BOX will be reboot when it is changed.)
⑥ One SNOW-1810U supports only one type
of LED pitch cabinets. Do not connect different types
of LED pitch cabinets.
⑦ SNOW-1810U displays the screen starting
from the upper left cabinet. To view the screen,
connect the HDBT cable to the HDBT OUT 1 port on S-BOX.
• For HDBT signal stability,
*STP, *FTP level. ( Length 15m~100m )
- Do not use "comb" or "pinstripe" cable.
use the cable above CAT6
Samsung Electronics
77
Hide quick links:
Advertisement
Table of Contents
