5. Cabinet + Frame Installation
◇ Align modules in X,Y direction
- After installing the cover PCB on each border, install the Holder PCB.
※ Holder PCB is a device to prevent the gap between modules.
① Complete all alignment work using Cover PCB and install it.
② Assemble the holder PCB on the outer surface of the screen.
③ Fasten using the M4L6 dish head bolt.
④ Install one Holder PCB on the outer surface of all modules located on the outskirts of the top.
Vertical center line
Horizontal center line
Fig.1 HOLDER PCB Assemby
Holder-PCB
M4L6
Samsung Electronics
Fig.2 Holder PCB position each set
45
45