5. Cabinet + Frame Installation
• Adjust Z-leveling between modules.
1. Attach Suction-Pad
Un-Lock
Lock
4. Insert Adjusment-Tool
Turn Holder Magnet
2. Move Module 2.0mm
2.0mm
~2mm
-
+
-
+
+ : counter clockwise -> module move forward
- : clockwise -> module move backward
Turn Holder 360° -> Module move 1.0mm
Samsung Electronics
3. Insert Gap-Tool
Turn Gap-Tool 90degree
90°
5. Hold Module by Hand
Turn Gap-Tool 90degree, Remove Gap-Tool
Check Flatness, Repeat process if needed
90°
42