Issue And Solution - Samsung LH008IWJ Series Installation Manual

10. Issue and Solution

 S-Box Network Connection Issue with LSM
① The LSM cannot find the S-Box or the Disconnected message is displayed.
-. Check the Ethernet cable connection.
-. Check the IP settings of S-Box.
-. Check if the target IP is the IP of the S-Box in the LSM.
-. Check if PC activation is " RJ45 " in S-Box
★ Remote controller에서 HOME -> Device ID -> PC Communication -> "RJ45" check
-. Check the network connection with the ping test etc.
★ PC CMD window - > Check ping xxx.xxx.xxx.xxx (S-Box IP address) communication.
-. Restart LSM.
② When the LSM cannot find a cabinet connected to the S-Box
-. Check the OCM cable connected to the I / G board and cabinet.
-. Check the cabinet IP address set by LSM. Check IP address of cabinet in LSM
(192.168.10. Do not use xxx band. Cabinet Address used for internal communication. )
-. Check the network connection with the ping test etc.
-. Restart the cabinet.
-. Restart LSM.
Samsung Electronics
108