Table of Contents
Advertisement
6. Disassembly & Front Service
Caution
◆
: SMPS Discharge
- Before you touch or remove the SMPS, touch the two
discharge points using a discharge Jig to verify the SMPS is full
discharged.
Silicon Coating
to prevent from electric shocking
(Back side)
Samsung Electronics
Grab point :
Touchable Area without additional
discharging process)
Do not grab point :
(Not touchable Area without additional
discharging process)
※ Before you disassemble SMPS, you have to discharge SMPS.
If you don't have any discharge jig, use Digital-Multimeter
OR wait sufficient time for being discharge.
Main cap Discharge point
1. Put Multi-meter in test mode.
2. Contact the cap with a prove.
3. When the cap is discharged, the
current does not flow.
60
Hide quick links:
Advertisement
Table of Contents
