3. Preparation for Cabinet Installation
④ 18ea Holder-PCB fixing screws and 4 Cover-PCB fixing screws are released.
⑤ Remove the filament tape attached to the top / bottom / left / right.
Fig.4 Holder-PCB & Cover-PCB & Protective Sheet Removal
HOLDER-PCB
X18
SCREW-MACHINE (6003-000133, M4,L8)
X4
SCREW-MACHINE (6003-001501, M3,L6)
COVER-PCB
Filament Tape
※ Remove Cover-PCB and screws and keep them separately.
It is required when working on the back.
※ The Cover-PCB, Screw, and Bolt are included in the accessory of the Cabinet
Samsung Electronics
21