Maintenance; Removing The Front, Back, End And Top Covers - GCC Technologies Puma Series Maintenance Manual

2

Maintenance

This chapter deals with component replacement and maintenance of the Puma Cutting Plotter. It gives
detailed step-by-step instruction on how to replace or adjust the components of this machine.
Components Replacement and Belt Tension Adjustment

Removing the Front, Back, End and Top Covers

The following steps are those involved in removal of the fro nt, back, end and top covers.
To Remove the End Covers:
1. Remove the end cover screws.
To the Contents Page
2. Put equal pressure on both
sides of the End Cover and pull to
remove.
30