Maintenance; Cleaning The Cutting Plotter - GCC Technologies RX II Series User Manual

Chapter 6 Maintenance
This chapter explains the basic maintenance (i.e. cleaning the cutting plotter) required for the cutting
plotter. Except for the procedures mentioned below, all other maintenance must be performed by a
qualified service technician.

6.1 Cleaning the Cutting Plotter

Cleaning the machine properly and regularly will ensure optimal performance out of your machine.
Cleaning Precaution!
Recommended Methods:
Gently wipe the cutting plotter surface with a lint-free cloth. If necessary, with a damp cloth

immersed in water or alcohol. Dry and wipe any remaining residue off a soft, lint-free cloth.
Wipe all dust and dirt from the tool carriage rails.

Use a vacuum cleaner to empty any accumulated dirt and media residue beneath the pinch roller

housing.
Clean the platen, paper sensors and pinch rollers with a damp cloth immersed in water or alcohol,

and dry with a soft, lint-free cloth.
Wipe dust and dirt from the stand.


Maintenance

Unplug the cutting plotter before cleaning it

in order to prevent electrical shock.
Never use solvents, abrasive cleaners or

strong detergents for cleaning. They may
damage the surface of the cutting plotter
and the moving parts.
6-1
RX II Series User Manual