Y Motor Encoder Test
Diagnostic Test for Tool Force (VCM)
This test is to diagnose the VCM. If the VCM is bad, the tool carriage cannot perform the up/ down action that generates the
tools force on the material.
Note: VCM means Voice Coil Motor that gen erates tool force
Diagnostic Test for Motor Movement
This feature is to diagnose the X and Y motors and drIIIers. If you encounter a motor movement problem, try to change the
main board first.
If the problem still re mains after replacing the main board, try replacing the motor.
Drum Moves Forward ?
Up/Down Key
Enter Key
Cancel Key
X Motor Moving Now
Previous/Next test item
Forward
CANCEL
51