Adjusting The X Motor Tension Belt - GCC Technologies Puma Series Maintenance Manual

Adjusting the X Motor Tension Belt

3. Tighten the 4 retaining screws to lock the
bracket in place.
Note: The belt connecting the drum and X motor needs to be tightened to a tension of 4 kg.
1.
2.
4. Fix the tension retaining screw.
Loosen the 4
retaining screws
locking the X-motor
bracket in place.
Place the push-pull
tension gauge's
hook-arm at the hole
of X motor bracket
and pull the motor
toward yourself
along the direction
parallel to the racket
edge, and keep it at
the 4kg tension
position.
42