Clm100 Accessories; Quick Install - Maretron CLM100 User Manual

CLM100 User's Manual
o Angular Velocity
o Angular Acceleration
o Temperature
o Humidity
o Resistance
o Strain Gauge
o Force (Load Cell)
o Pressure
o Decibels
o Rotational Rate – can be used to monitor shaft speed or engine RPM

1.4 CLM100 Accessories

Maretron offers the following pressure transducer accessories for the CLM100:
 PT-V-0-1BAR-01
 PT-0-3PSI-01
 PT-0-5PSI-01
 PT-0-10PSI-01
 PT-0-50PSI-01
 PT-0-100PSI-01
 PT-0-300PSI-01
 PT-0-500PSI-01
 PT-0-1000PSI-01
 PT-0-3000PSI-01
 PT-0-5000PSI-01
 PT-SNUB-01
WARNING
Maretron pressure transducers are not approved for use with gasoline. If
you wish to use the CLM100 to monitor pressures of gasoline, you must
obtain a pressure transducer that is approved for use with gasoline.
For other parameters, Maretron does not offer any accessories for the CLM100; however, the
CLM100 is compatible with any transducer which offers an industry standard 4-20mA current
loop interface and is able to operate with a current loop excitation voltage of 12-15VDC.

1.5 Quick Install

Installing the Maretron CLM100 involves the following steps. Please refer to the individual
sections for additional details.
1. Unpack the Box (Section 3.1)
2. Choose a Mounting Location (Section 3.2)
3. Mount the CLM100 (Section 3.3)
Page 2
Pressure Transducer Vacuum to 1 Bar (14.5 PSI)
Pressure Transducer 0 to 3 PSI (0.21 bar)
Pressure Transducer 0 to 5 PSI (0.34 bar)
Pressure Transducer 0 to 10 PSI (0.69 bar)
Pressure Transducer 0 to 50 PSI (3.45 bar)
Pressure Transducer 0 to 100 PSI (6.89 bar)
Pressure Transducer 0 to 300 PSI (20.68 bar)
Pressure Transducer 0 to 500 PSI (34.47 bar)
Pressure Transducer 0 to 1000 PSI (68.95 bar)
Pressure Transducer 0 to 3000 PSI (206.84 bar)
Pressure Transducer 0 to 5000 PSI (344.74 bar)
Pressure Snubber
Revision 1.0