Installation; What You Need To Get Started - National Instruments IMAQ PCI-1422 User Manual

Installation

What You Need to Get Started

© National Instruments Corporation
This chapter lists items you need to get started acquiring images with
your IMAQ device. This chapter also describes optional equipment and
custom cables for your IMAQ device and explains how to unpack,
configure, and install your IMAQ device.
To set up and use your PCI/PXI-1422, you need the following items:
❑
One of the following 1422 devices:
– PCI-1422
– PXI-1422
❑
Getting Started with Your IMAQ System
❑
IMAQ PCI/PXI-1422 User Manual
❑
NI-IMAQ Release Notes (2.5 or higher)
❑
NI-IMAQ 2.5 or higher for Windows 2000/NT/Me/9x and
documentation
❑
Optional software packages and documentation:
– IMAQ Vision for LabVIEW or Measurement Studio
(LabWindows/CVI, Visual C++, Visual Basic)
– IMAQ Vision Builder
– LabVIEW
– Measurement Studio (LabWindows/CVI, Tools for Visual Basic)
❑
Your Pentium-based PCI computer running Windows 2000/NT/Me/
or 9x.
❑
IMAQ D100 series camera cables, depending on your camera
❑
A digital video camera
2-1
2
IMAQ PCI/PXI-1422 User Manual