Installation; What You Need To Get Started - National Instruments IMAQ PXI-1407 User Manual

Installation

What You Need to Get Started

© National Instruments Corporation
This chapter lists what you need to get started acquiring images with
your IMAQ device; describes optional equipment and custom cables;
and explains how to unpack, configure, and install your IMAQ device.
To set up and use your PCI/PXI-1407, you will need the following:
One of the following 1407 devices:
– PCI-1407
– PXI-1407
Getting Started with Your IMAQ System
NI-IMAQ release notes
IMAQ PCI/PXI-1407 User Manual
NI-IMAQ for Windows 2000/NT/9x and online documentation
Optional software packages and documentation:
– IMAQ Vision for G, LabWindows/CVI, or ComponentWorks
– IMAQ Vision Builder
– LabVIEW
– BridgeVIEW
– LabWindows/CVI
IMAQ BNC-1 shielded, 75 Ω BNC cable for VIDEO (included
with your PCI-1407)
Your Pentium-based PCI, PXI, or CompactPCI computer running
Windows 2000, Windows NT, or Windows 9x
A video camera or other video source
2-1
2
IMAQ PCI/PXI-1407 User Manual