Advertisement
Quick Links
Espresso Finish Closed Cabinet
TV Stand
for TVs up to 50"/95 lbs
NS-WD1450/NS-WD1450-C
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS: PARTS.....................................3
PACKAGE CONTENTS: HARDWARE..........................4
ASSEMBLY INSTRUCTIONS.........................................5
CARE AND MAINTENANCE...................................... 19
USER GUIDE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Insignia NS-WD1450
Summary of Contents for Insignia NS-WD1450
-
Page 1: Table Of Contents
USER GUIDE Espresso Finish Closed Cabinet TV Stand for TVs up to 50”/95 lbs NS-WD1450/NS-WD1450-C SAFETY INFORMATION AND SPECIFICATIONS..2 PACKAGE CONTENTS: PARTS........3 PACKAGE CONTENTS: HARDWARE......4 ASSEMBLY INSTRUCTIONS.........5 CARE AND MAINTENANCE........19 Before using your new product, please read these instructions to prevent any damage. -
Page 2: Safety Information And Specifications
Overall dimensions (H × W × D): swallowed. Keep these items away from young 25.5 × 47.25 × 19 in. (64.8 x 120 x 48.3 cm) children! Model #: NS-WD1450 19 inch (48.3 cm) 47.3 inch (120 cm) 95 lbs. -
Page 3: Package Contents: Parts
ESPRESSO FINISH CLOSED CABINET TV STAND PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. -
Page 4: Package Contents: Hardware
ESPRESSO FINISH CLOSED CABINET TV STAND PACKAGE CONTENTS: HARDWARE Note: The table below shows the required hardware. You may receive extra hardware. Make sure that you have all the hardware necessary to assemble your new TV stand. Label Hardware Qty. Label Hardware Qty. -
Page 5: Assembly Instructions
ESPRESSO FINISH CLOSED CABINET TV STAND ASSEMBLY INSTRUCTIONS Step 1: Preparing the right and left ends and the uprights Caution: Assemble your stand on a carpeted floor or on the empty carton to avoid scratching your stand. ® • Push a Sauder twist-lock fastener (U) into the large holes in the right and left ends (A and B) and uprights (C and D). - Page 6 ESPRESSO FINISH CLOSED CABINET TV STAND Step 2 Preparing the short brace • Push two hidden cams (V) into the short brace (Q). Then, insert the metal end of a cam dowel (W) into each hidden cam (V). NOTE: Do not tighten the hidden cams in this step. Arrow Arrow Insert the cam dowel into the hidden cam.
- Page 7 ESPRESSO FINISH CLOSED CABINET TV STAND Step 3 Preparing the top • Fasten the top molding (O) to the top (E). Use six silver 1-1/8” flat head screws (GG). Finished surface Curved edge You’ll need: GG (6) Phillips screwdriver www.insigniaproducts.com...
- Page 8 ESPRESSO FINISH CLOSED CABINET TV STAND Step 4 Attaching the uprights to the top • Fasten the uprights (C and D) to the underside of the top (E), then tighten the four Sauder twist-lock® fasteners (U). To use the Sauder twist-lock® fasteners: 1 Insert the dowel end of the fastener into the hole of the adjoining part.
- Page 9 ESPRESSO FINISH CLOSED CABINET TV STAND Step 5 Attaching the outer backs 1 Insert two metal pins (CC) into each side of the outer backs (H). 2 Insert the metal pins (CC) in the outer backs (H) into the holes in the uprights (C and D). You’ll need: CC (8) www.insigniaproducts.com...
- Page 10 ESPRESSO FINISH CLOSED CABINET TV STAND Step 6 Attaching the ends • Fasten the ends (A and B) to the top (E), then tighten the four Sauder twist-lock® fasteners (U). Note: Make sure that the metal pins (CC) in the outer backs (H) insert into the holes in the ends (A and B). Finished edge Finished edge You’ll need:...
- Page 11 ESPRESSO FINISH CLOSED CABINET TV STAND Step 7 Attaching the bottom and the short brace 1 Fasten the bottom (F) to the ends (A and B) and the uprights (C and D) with eight black 1-7/8” flat head screws (FF). 2 Fasten the short brace (Q) to the bottom (F), then tighten the two hidden cams (V).
- Page 12 ESPRESSO FINISH CLOSED CABINET TV STAND Step 8 Preparing the braces • Fasten the eighteen metal brackets (Y) to the long braces (P) and side braces (R) with eighteen black 9/16” large head screws (II). Note: Make sure that the brackets are even with the edges of the braces. Unfinished surface Unfinished...
- Page 13 ESPRESSO FINISH CLOSED CABINET TV STAND Step 9 Attaching the braces 1 Fasten the long braces (P) to the bottom (F) with eight black 9/16” large head screws (II). 2 Fasten the long braces (P) to the short brace (Q) with two black 1-7/8” flat head screws (FF). 3 Fasten the side braces (R) to the bottom (F) and long braces (P) with ten black 9/16”...
- Page 14 ESPRESSO FINISH CLOSED CABINET TV STAND Step 10 Attaching the base blocks and skirts 1 Fasten the base blocks (S and T) to the long brace (P) with eight silver1-1/8” flat head screws (GG). Note: There are no pre-drilled holes in the base blocks. The screws will tighten into the grooves in the base blocks. The outer base blocks (T) have only one notch and the inner base blocks (S) have two notches.
- Page 15 ESPRESSO FINISH CLOSED CABINET TV STAND Step 11 Attaching the back 1 Carefully turn over your TV stand onto its front edges. Unfold the back (G) and lay it over the unit. 2 Make sure the back is centered along all four edges. Push on opposite corners, if required, to make it square. 3 Fasten the back (G) to the unit with nails (KK).
- Page 16 ESPRESSO FINISH CLOSED CABINET TV STAND Step 12 Attaching the doors 1 Carefully stand your unit upright. 2 Fasten two hinges (Z) to each door (I). Use four black 1/2” flat head screws (JJ) on each door. 3 Fasten the first door (I) to the right end (A) and the second door (I) to the left end (B). Use the screws in the hinges.
- Page 17 ESPRESSO FINISH CLOSED CABINET TV STAND Step 13 Adjusting the doors Refer to the enlarged diagram to identify the parts on the hinges. The doors may need some adjustments. Follow the text below to make needed adjustments. DOOR ADJUSTMENTS: • To adjust the doors from side to side (horizontal), loosen the horizontal adjustment screws several turns, then turn the adjusting screw in or out.
- Page 18 ESPRESSO FINISH CLOSED CABINET TV STAND Step 14 Attach miscellaneous hardware and labels 1 Push the rubber sleeves (DD) over one end of each metal pin (CC). Insert the metal end of the pins into the hole locations of your choice in the ends (A and B) and uprights (C and D). Set the adjustable shelves (J and K) onto the metal pins.
-
Page 19: Care And Maintenance
ESPRESSO FINISH CLOSED CABINET TV STAND CARE AND MAINTENANCE Wood/Laminate • Use your favorite type of furniture polish. • Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand. • Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no adverse reaction. - Page 20 FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN Insignia and are not returned to you. If service of Products or DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND parts are required after the Warranty Period expires, you must NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY pay all labor and parts charges.
- Page 21 Lot number: 361832 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
Need help?
Do you have a question about the NS-WD1450 and is the answer not in the manual?
Questions and answers