Server Menu - Intel L440GX+ Product Manual

Server Menu

You can make the following selections on the Server Menu itself.
Feature
System Management
Console Redirection
PEP Management
Enable Sleep Button
PCI IRQs to IO-APIC
mappings
Processor Retest
Assert NMI on PERR
Assert NMI on SERR
System Management Submenu
Feature
Server Management
Info
System Event
Logging
Clear Event Log
EMP Password switch
EMP Password
EMP Escape
sequence
44
Choices Description
Enters submenu.
Enters submenu.
Enters submenu.
Disabled
Enabled
Disabled Enabled - BIOS can describe all 24 IO APIC pins in the
Enabled
MP table for PCI interrupts. Not all MP operating
systems and drivers can understand this description of
the interrupts in the MP table.
Disabled - BIOS will only use 16 IO APIC pins in the MP
table for PCI interrupts. All PCI interrupts are routed to a
standard ISA IRQ pins on IO APIC. All operating
systems will work with standard ISA IRQ entries.
Yes Yes tells BIOS to clear the historical processor status
No and retest all processors on the next boot. BIOS
automatically resets to No in next boot.
Disabled Enabled generates an NMI on a parity error (PERR). To
Enabled activate this feature, the system error (SERR) option
must be enabled.
Enabled generates an NMI on SERR.
Disabled
Enabled
Choices Description
Enters submenu.
Disabled When enabled, system events will be logged by BIOS
Enabled and BMC in system event log.
No Yes clears the system event log (SEL) in BMC. BIOS
Yes automatically resets to NO for next boot.
Disabled Sets the EMP password.
Enabled
[A..Z, 0..9]
This field only shows up when the EMP password switch
is enabled. Entering a password and pressing return will
send the password immediately to the BMC. If a beep is
heard the password was not accepted. If no password is
entered, anyone has access to the server through the
EMP Console.
+++ Sets the escape sequence for the modem being used for
EMP. This will force the modem to command mode.
This is only used if the EMP direct connect/modem mode
is set to modem.
continued
Configuration Software and Utilities