Server Menu; Table 30. Bios Setup, Server Menu Selections - Intel SE7520BD2 Technical Product Specification

Intel® Server Board SE7520BD2 Technical Product Specification
NMI Control Disabled
Enabled
3.2.8

Server Menu

Feature
System management
Serial Console Features
Event Log configuration
Assert NMI on SERR
Assert NMI on PERR
Resume on AC Power Loss
FRB-2 Policy
Late POST Timeout
Hard Disk OS Boot Timeout
PXE OS Boot Timeout
Revision 1.3
Enable / disable NMI control for the
front panel NMI button.

Table 30. BIOS Setup, Server Menu Selections

Options
N/A N/A
N/A N/A
N/A Configures event logging.
Disabled If enabled, NMI is generated on
SERR and logged.
Enabled
Disabled If enabled, NMI is generated.
SERR option needs to be
Enabled
enabled to activate this option.
Stays Off Determines the mode of
operation if a power loss occurs.
Power On
Stays off, the system will remain
Last State
off once power is restored. Power
On, boots the system after power
is restored.
Disable BSP This controls action if the boot
processor will be disabled or not.
Do not disable BSP
Retry on Next Boot
Disable FRB2 Timer
Disabled This controls the time limit for
add-in card detection. The
5 minutes
system is reset on timeout.
10 minutes
15 minutes
20 minutes
Disabled This controls the time limit
allowed for booting an operating
5 minutes
system from a Hard disk drive.
10 minutes
The action taken on timeout is
15 minutes
determined by the OS Watchdog
Timer policy setting.
20 minutes
Disabled This controls the time limit
allowed for booting an operating
5 minutes
system using PXE boot. The
10 minutes
action taken on timeout is
15 minutes
determined by OS Watchdog
Timer policy setting.
20 minutes
Intel Confidential
Default settings:
For mBMC: "Disabled"
For IMM: "Enabled"
Help Text
Selects submenu.
Selects submenu.
Selects submenu.
Grayed out if "NMI on
SERR" is disabled.
"Last State" is only
displayed if the Intel
Management Module is
present. When
displayed, "Last State" is
the default.
When set to "Stays Off,"
"Power Switch Inhibit" is
disabled.
"Disable BSP" and "Do
not disable BSP" are only
displayed if the Intel
Management Module is
present.
BIOS Architecture
Description
53