Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GSS HDTV 1000 ASI LAN
Summary of Contents for GSS HDTV 1000 ASI LAN
- Page 1 Head-End Digital Modulator HDTV HDTV 1000 ASI LAN HDTV 1001 C CLASS Phone: +49 (0) 911 / 703 8877 Grundig SAT Systems GmbH Fax: +49 (0) 911 / 703 9210 Beuthener Strasse 43 E-mail: info@gss.de D-90471 Nuremberg Internet: http://www.gss.de...
-
Page 2: Table Of Contents
Selecting channel / frequen cy setting ............23 Setting the output channel ................24 Setting the output frequency ................24 Switching the modulator off or on ..............25 Adjusting the output levels of the channel strips ..........25 - 2 - HDTV 1000 ASI LAN / HDTV 1001 C... - Page 3 Setting the scrambling ..............39 Setting the PID monitoring ..............40 Configuring the CA module ..............40 Setting the station filter ..............41 6 Final procedures .....................43 7 Channel and frequency tables .................44 - 3 - HDTV 1000 ASI LAN / HDTV 1001 C...
-
Page 4: Safety Regulations
For further information please read the assembly instructions for the head- end station used. Take action to prevent static discharge when working on the device. General information Packing contents - 4 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 5: Meaning Of The Symbols Used
ASI input: ..............ASI output: ..............Connection strip (10-pin): ....for supply voltages and control circuits RS-232 socket: ........serial interface for software update Conditional access: ........ several channels can be decoded. - 5 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 6: Description
SAT input ”A“ CA module "A" TS B Receiving stage SAT input ”B“ Transport stream 1 "B" TS ASI Transport stream 2 ASI input - 6 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 7: Menu Setting "A+Asi = 1 A+Asi = 2
“B” and the transport stream from the ASI input “TS ASI” via modulator “A” (MA). Transport stream 1 ASI output TS ASI Modulator ASI input "A" Combiner HF output Modulator Transport stream 2 "B" - 7 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 8: Menu Setting "2 => Asi Asi => Mb
BE-Flash” and the current assembly instructions on the website “www.gss.de”. The cassette is designed for use in the following head-end stations: STC 1200 STC 316 STR 19-8 and PST 19-1 - 8 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 9: How The Tps Module Works
The TPS module can adjust the “Network Information Table” (NIT) to accommodate the new station data. The “NIT” contains data which is required by the set-top box for the automatic search feature. - 9 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 10: Explanation Of The Term "Symbol Rate
Reception from a transponder with a very low symbol rate (SCPC station) The extremely low data rate means that the output symbol rate is very low. If rate to a higher value. Defined symbol rates - 10 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 11: Assembly
When mounting the cassette in a STR 19-8 or PST 19-1 head-end station which is installed in a 19" cabinet, make sure the connections leading in and out for the 19" cabinet are made using cable terminals. - 11 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 12: Connecting The Cassette
The operating software of the cassette can be updated via the 9-Pin D-SUB socket “RS232” using a PC or notebook and the software “BE-Flash”. You can find the current operating software on the website “www.gss.de”. - 12 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 13: Retrofitting A Ca Module
(top) of the CA module. (see chap. 3.3) with the top side of the CA module facing the top side of the cassette. and contact it to the common interface. - 13 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 14: The Control Panel At A Glance
(in menu “DEFAULT” -> Factory reset). - 14 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 15: Programming
In order to prevent interference within the head-end station and the cable sys- at 256 QAM. output level using the appropriate level controls or software dependent on the head-end station used. Please regard the assembly instructions of the respective head-end station. - 15 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 16: Programming Procedure
Line A <= => Line B Bx 4A OUTPUT Channel Channel / Freq. Bx 4A OUTPUT on / off Bx 4A LEVEL 0 dB 0 … -10 dB - 16 - HDTV 1000 ASI LAN / HDTV 1001 C Bx 4A... - Page 17 64-QAM normal 4 … 256 Bx 4A STUFFING SR=6900 (6325) Bx 4A FAILURE Null Packets Null Packets … Single Carrier Bx 4A TS/ONID - 17 - HDTV 1000 ASI LAN / HDTV 1001 C 0x0001,0100 on / off...
- Page 18 Bx 4A FACTORY zurücksetzen und speichern reset to factory defaults Page 16 Defaults => STORE => M and store - 18 - HDTV 1000 ASI LAN / HDTV 1001 C...
-
Page 19: Channel Strip "A" With Ca Module
*) Die angezeigte Information ist nächster Service abhängig vom verwendeten next service CA-Modul. The information displayed is dependent on the CA module used. Page 17 - 19 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 20: Programming The Cassette
“Box 4” stands for slot 4 ”DVBS2-TPM” Type of cassette ”V 12” Software version of the cassette button. —> The “Selecting the input signal path” – “INROUTE” menu is activated. - 20 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 21: Selecting The Input Signal Path
—> The “Selecting the channel strip” – “LINE” menu is activated (page 23). button. —> The “Setting the ASI transfer rate” – “ASI RATE” menu is activated. - 21 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 22: Setting The Asi Transfer Rate
“pos.” (positive – standard) and us- ing the buttons set to “neg.” (negative). buttons to position the cursor under “cont.” (continuous – standard) and using the set to “burst”. - 22 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 23: Selecting The Channel Strip
DVB-S DVB-S / DVB-S 2 … ing transmission problems. Bx 4A FREQ Bx 4A Anzeige: Signalqualität Display: Signal quality 11835 -0.6 CN 14 12.0 dB (+ 9.6) OK - 23 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 24: Setting The Output Channel
CN 14 ASI 12.0 dB TV + (+ 9.6) OK 01/10 Removing / activating nächster Service (Pro . . . . . - 24 - HDTV 1000 ASI LAN / HDTV 1001 C next service (station) Programme entfernen... -
Page 25: Switching The Modulator Off Or On
“0” to “–10 Bx 4A PROGRAM Bx 4A TV + 01/10 Removing / activating dB”. nächster Service (Pro Filter Das Erste next service (station) - 25 - HDTV 1000 ASI LAN / HDTV 1001 C Programme entfernen... -
Page 26: Setting The Lnb Oscillator Frequency
Service (Pro SWF3 next service (station) Bx 4A STUFFING Programme entfernen - 26 - HDTV 1000 ASI LAN / HDTV 1001 C SR=6900 (6325) ASI TV + 01/10 Removing / activating nächster Service (Pro . . . . . -
Page 27: Setting The Dvb Mode
(e.g. “– 1.8”) to less than by varying the input frequency using the buttons. button. —> The “Testing the signal to noise ratio” – “C/N” menu is activated. - 27 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 28: Testing The Signal To Noise Ratio
Status LED Green Signal quality is good Channel strip "A" Signal quality is poor Yellow No signal The channel strip (modulator) is switched off Status LED Channel strip "B" - 28 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 29: Setting The Station Filter
“A” and therefore cannot be set in channel strip “B”. Programming channel strip “B” the transport stream coming from the ASI input can be processed only. - 29 - HDTV 1000 ASI LAN / HDTV 1001 C... - Page 30 => Make on / off Make “01/10” – The 1st of 10 stations is being displayed. “Das Erste” – Station name Bx 4A CAT-ID - 30 - HDTV 1000 ASI LAN / HDTV 1001 C 0XDE00 on / off...
- Page 31 PROGRAM Filter on” menu the station filters switched on can be switched “off” using the buttons if necessary. - 31 - HDTV 1000 ASI LAN / HDTV 1001 C...
-
Page 32: Setting The Qam Modulation
QAM modulation of > 64 QAM places a large burden on the cable net- Bx 4A FAILURE the converted output signal can be affected. Null Packets Null Packets … Single Carrier Bx 4A TS/ONID - 32 - HDTV 1000 ASI LAN / HDTV 1001 C 0x0001,0100... -
Page 33: Inverting The User Signal
PID 0x0000 on / off respective channel strip. Bx 4A REMAP 0x0000 –> 0000 on / off - 33 - HDTV 1000 ASI LAN / HDTV 1001 C auf Werkseinstellung Bx 4A FACTORY Bx 4A FACTORY zurücksetzen und speichern... -
Page 34: Setting A Substitute Signal In The Case Of An Incorrect Input Signal
/ off button. —> The “Setting the transport stream ID and the ORGNET-ID” – “TS/ONID” menu is activated. Bx 4A DROP PID 0x0000 on / off - 34 - HDTV 1000 ASI LAN / HDTV 1001 C Bx 4A REMAP... -
Page 35: Setting The Transport Stream Id And The Orgnet-Id
0x0000 –> 0000 on / off cassettes also add this new cable NIT. The status of all auf Werkseinstellung - 35 - HDTV 1000 ASI LAN / HDTV 1001 C Bx 4A FACTORY Bx 4A FACTORY zurücksetzen und speichern reset to factory defaults ... -
Page 36: Network/Operator Identification
CAT “on”. —> The menu display switches to “modified”. —> If you try to change the network/operator identification (operator ID) of not modified” appears in the display. - 36 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 37: Deleting A Pid
PID (“–> 0000”). to set the cursor to “off” and switch to “on” (rename) using the buttons. - 37 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 38: Factory Reset
“M” – Station filter is switched on. “N” – NIT is activated. “C” – Network/operator identification CAT is activated. —> If necessary set channel strip “B”. - 38 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 39: 5.4.1 Operation With A Ca Module
*) Die angezeigte Information ist nächster Service abhängig vom verwendeten next service CA-Modul. The information displayed is dependent on the CA module used. - 39 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 40: Setting The Pid Monitoring
Bx 4A 01/03 MENU Information Meaning of the indicators: “Bx 4A A” “01/03” – The first of three menu items is activated. “MENU” – The menu of the CA module is activated. - 40 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 41: Setting The Station Filter
– TV channel type “X” – The currently selected station is to descramble. “04/09” – The 4th of 9 stations read is being displayed. “..” – Station name - 41 - HDTV 1000 ASI LAN / HDTV 1001 C... - Page 42 X – Information *) . . . . 0 – button. —> The “Setting the QAM modulation” – “QAM” menu is activated (page 32). - 42 - HDTV 1000 ASI LAN / HDTV 1001 C...
-
Page 43: Final Procedures
EMC regulations securely. appropriate open-ended spanner. output level using the appropriate level controls or software dependent on the head-end station used. Please regard the assembly instructions of the respective head-end station. - 43 - HDTV 1000 ASI LAN / HDTV 1001 C... -
Page 44: Channel And Frequency Tables
C 68 850.00 C 29 538.00 C 39 618.00 C 49 698.00 C 59 778.00 C 69 858.00 C 30 546.00 C 40 626.00 C 50 706.00 C 60 786.00 - 44 - HDTV 1000 ASI LAN / HDTV 1001 C... - Page 45 Service: Phone: +49 (0) 911 / 703 2221 Fax: +49 (0) 911 / 703 2326 Email: service@gss.de Alterations reserved. Technical data E. & O.E. © GSS GmbH V12/07122009...
Need help?
Do you have a question about the HDTV 1000 ASI LAN and is the answer not in the manual?
Questions and answers