To Open The Service Cover; Installing The Indoor Unit; Precautions When Installing The Indoor Unit; To Install The Mounting Plate - Daikin FTXP50M2V1B Installer's Reference Manual

6.2.6 To open the service cover

6.3 Installing the indoor unit

6.3.1 Precautions when installing the indoor unit

6.3.2 To install the mounting plate

FTXP50~71M2V1B + FTXF20~71A2V1B + ATXF50~71A2V1B
Daikin room air conditioner
4P513661-8H – 2019.12
a
b
a
c
a Tab
b Protruding part on the top of the cover
c Screw
5 To re-install the cover, first hook the bottom tab onto the electrical wiring
box, and slide the cover into the 2 upper tabs.
1 Remove 1 screw from the service cover.
2 Pull out the service cover horizontally away from the unit.
a Service cover screw
b Service cover
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
General safety precautions
▪
Preparation
1 Install the mounting plate temporarily.
2 Level the mounting plate.
3 Mark the centres of the drilling points on the wall using a tape measure.
Position the end of tape measure at symbol " ".
4 Finish the installation by securing the mounting plate on the wall using
M4×25L screws (field supply).
a b
6 Installation
|
3
a
Installer reference guide
25