To Re-Install The Front Panel; To Remove The Front Grille; To Re-Install The Front Grille; To Remove The Electrical Wiring Box Cover - Daikin FTXP50M2V1B Installer's Reference Manual

6 | Installation

6.2.2 To re-install the front panel

6.2.3 To remove the front grille

6.2.4 To re-install the front grille

6.2.5 To remove the electrical wiring box cover

Installer reference guide
24
1 Attach the front panel. Align the shafts with the slots and push them all the
way in.
2 Close the front panel slowly; press at both sides and at the centre.
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,...)
when installing, maintaining or servicing the system.
1 Remove the front panel to remove the air filter.
2 Remove 2 screws (class 20~35) or 3 screws (class 50~71) from the front grille.
3 Push down the 3 upper hooks marked with a symbol with 3 circles.
b
a
a Upper hook
b Symbol with 3 circles
4 We recommend opening the flap before removing the front grille.
5 Place both hands under the centre of the front grille, push it up and then
toward you.
1 Install the front grille and firmly engage the 3 upper hooks.
2 Install 2 screws (class 20~35) or 3 screws (class 50~71) back on the front grille.
3 Install the air filter and then mount the front panel.
1 Remove the front grille.
2 Remove 1 screw from the electrical wiring box.
3 Open the electrical wiring box cover by pulling the protruding part on the top
of the cover.
4 Unhook the tab on the bottom and remove the electrical wiring box cover.
a
FTXP50~71M2V1B + FTXF20~71A2V1B + ATXF50~71A2V1B
Daikin room air conditioner
4P513661-8H – 2019.12