Sanav GX-101 Manual page 22

4.12 Setting up the TCP/ UDP IP
When the router is set to be TCP or UDP, please refer to following command for setting the report IP.
Setup format：＃「username」,「Password」,「Function Code」,「IP」＊
Example：＃username,0000,18,202.39.31.179:1337＊
The table 4.12.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
18
202.39.31.179:1337
*
The table 4.12.2 shows each confirmation message reply after setup.
Situation
Setup Succeeds
Incorrect password
Incorrect username or command format
Description
Start sign.
Default ID of GX-101.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 18 defines to setup TCP/ UDP IP.
IP address
End sign.
Table 4.12.1
Message Reply
Username. Device TCP/UDP is updated
[username] + Password setup Fail!
[username] + command error
Table 4.12.2
22