Set Up The Gprs Apn (Access Point Name) - Sanav GX-101 Manual

4.3 Set up The GPRS APN (Access Point Name
For uploading the data to a web server, you must have a set of GPRS APN from your GSM network. Various GSM network
provides different GPRS APN settings. Please check the referential tables for APN in the Chapter 8 before setup. If you
could not find the name of your GSM service provider, please ask your GMS service provider about the APN settings. If the
username and password of APN are indefinite or showed in blank, just leave the parameters blank (no space). You can
follow the Setup Format below to setup the APN that is provided by your GSM network.
Setup format：＃「username」,「Password」,「Function Code」,「access point name」,「user」,「password」＊
Example：＃username,0000,3,internet,user,password＊
The table 4.3.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
3
Internet
User
Password
*
The table 4.3.2 shows each confirmation message reply after setup.
Situation
Setup Succeeds
Setup Fail
Incorrect password
Incorrect username or command format
GX-101 is in Emergency Mode
Description
Start sign.
Default ID of GX-101.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 3 defines the APN
Name of APN
Username of APN
Password of APN
End sign.
Table 4.3.1
Message Reply
[username] + GX101 GPRS APN is updated.
[username] + GX-101 GPRS APN setup Fail!
[username] + Password setup Fail!
[username] + command error
[username] + in emergency, GPRS APN setup is not allowed.
)
Table 4.3.2
12