Deactivate Panic Mode - Sanav GX-101 Manual

4.14 Deactivate Panic Mode

In this function, it helps you to deactivate panic mode forcedly. The SMS command is as following:
Setup format：＃「username」,「Password」,「Function Code」＊
Example：＃username,0000,offpanic＊
The table 4.14.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
offpanic
*
The table 4.13.2 shows each confirmation message reply after setup.
Situation
Setup Succeeds
Setup Fail
Incorrect password
Incorrect username or command format
Description
Start sign.
Default ID of GX-101.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode offpanic is to deactivate the panic status of GX-101
End sign.
Table 4.14.1
Message Reply
[username] + is forced to deactivate panic status.
[username] + is not in Panic mode
[username] + Password setup Fail!
[username] + command error
Table 4.14.2
24