5 Installation Procedure
9.
Replace and secure the front covers of the drive (C, F) and replace the digital operator (D).
Figure 11
Note: Take proper precautions when wiring the option so that the front covers will easily fit back onto the drive. Make sure no cables
are pinched between the front covers and the drive when replacing the covers.
10.
Set drive parameters in
address unique to the network.
16
Figure 11 Replace the Front Covers and Digital Operator
Table 8
for proper option performance. Be sure to set parameter F6-30 to a node
YASKAWA ELECTRIC SIEP C730600 42B 1000-Series Option SI-P3 Technical Manual
C
D
F