Domestic Dialing; Acknowledging Domestic Calls; Programming Domestic Telephone Numbers14; Disable Domestic Dialing - Bosch ICP-CC404 User Manual

ICP-CC404 | User's Guide | 20.0
If your installer programmed answering
machine bypass, you must call the control
panel twice to connect to the system. For
example, call the telephone number for
the control panel, let the call ring no more
than four times, and then hang up the
telephone. Wait at least 8 sec and call the
control panel again.

20.0 Domestic Dialing

Domestic dialing enables the control panel to call
your mobile phone or a relative or friend if the
system detects an alarm. You can program up to
three different telephone numbers to call when an
alarm occurs. Although only your installer can set
the system to report in the domestic format, the
Master Code holder can change the domestic
telephone numbers at any time.
Domestic dialing enables the control panel to call
your mobile phone or a relative or friend if the
system detects an alarm. You can program up to
three different telephone numbers to call when an
alarm occurs. Although only your installer can set
the system to report in the domestic format, the
Master Code holder can change the domestic
telephone numbers at any time.
20.1

Acknowledging Domestic Calls

If an alarm occurs, the system calls the first
programmed telephone number. When you answer
an incoming call, the system sounds a repeating siren
tone followed by a pause, continuously for 2 min (for
example, siren tone, pause, siren tone, and pause).
If you do not acknowledge the call from the control
panel during a pause between siren tones, the control
panel hangs up after 2 min, and calls the next
telephone number.
Press [*] for 1 to 3 sec during the pause to
acknowledge the call.
If you acknowledge the call, the control panel does
not call any more phone numbers for that event. If
the call is successfully acknowledged, a tone of
decreasing pitch sounds.
14
Domestic Dialing
Table 11: Domestic Dialing Telephone Digits
Digit
Required
0
1
2
3
4
5
6
7
20.2 Programming Domestic Telephone
Numbers
If your system is configured for domestic dialing, the
Master Code holder can program the telephone
numbers the control panel calls if an alarm occurs.
To program telephone numbers:
1. Enter your four-character Master Code and press
[2 #] (for example, [2 5 8 0 2 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
If there are telephone numbers already
programmed, the numbers appear one digit at a
time by the codepad indicators.
If there are no telephone numbers programmed,
another two beeps sound after entering this
mode. These two beeps are normally heard after
the last digit of the last telephone number
appears.
2. Enter the first telephone number (for example,
[9 6 7 2 1 7 1 7]).
As you enter each digit, the corresponding
codepad indicators light.
3. To program another telephone number, press
[* 4] and repeat Step 2.
This inserts a break between the first telephone
number and the second telephone number.
4. Press [#] to exit from this function.
20.3

Disable Domestic Dialing

To suspend domestic dialing (for example, you are
moving and do not want the system to continue
calling your mobile phone):
1. Enter your four-character Master Code and press
[2 #] (for example, [2 5 8 0 2 #]).
Two beeps sound and the STAY and AWAY
indicators flash.
2. Press [* 4 #].
The STAY and AWAY indicators turn off.
Bosch Security Systems, Inc. | 10/08 | F01U089400-01
Number to Digit
Program Required
0 8
1 9
2
3 *
4 #
5 4-sec pause
6 break
7
Number to
Program
8
9
*1
*2
*3
*4