Rigging Elements For Stacked Arrays; A-Tilt - L-Acoustics A10 Owner's Manual

Rigging system description

Rigging elements for stacked arrays

A-TILT

A-TILT is a site angle adjustment accessory that interfaces between KS21 and A10 Wide/Focus in a stacked array. It is
used in combination with two KS21-OUTRIG
*
Alternatively, mount the KS21 array on KS21-CHARIOT and use K2-JACK to stabilize the array.
Do not use A-TILT in a own array.
The locating pins on A-TILT match the lodgings on the enclosure, to enable deployments with the HF section on either side.
A-TILT is secured to the enclosure and to the subwoofer with threaded knobs.
A-TILT-compatible subwoofers
The A-TILT subwoofer knob can only be used with KS21.
subwoofer knob
position in use
34
*
under KS21 to ensure stability.
studs
enclosure knob
angle pin (x2)
⌀ M20
subwoofer knob
enclosure knob
storage position
A10 owner's manual (EN) version 1.1