Connection To La AmpliEd Controllers - L-Acoustics A10 Owner's Manual

Connection to LA amplied controllers
Enclosure drive capacity per amplied controller
Make sure the total number of connected enclosures does not exceed the maximum number of enclosures per controller
(refer to the footnotes).
A10 Wide/Focus
KS21
Cabling schemes for A10 Wide/Focus / KS21
Refer to the cabling schemes to connect the enclosures to different types of output connectors.
One-channel speakON output
1+/1-
Two-channel speakON output
SP
CC4FP
1+/1-
2+/2-
Four-channel CA-COM output
DO
*
For passive loudspeakers, the value corresponds to the number of enclosures in parallel on the output. For active
loudspeakers, the value corresponds to the number of sections in parallel on the output.
**
LA8 can drive up to two KS21 per output, but no more than six per controller at high level.
A10 owner's manual (EN) version 1.1
LA4X
*
per output / total
2 / 8
1 / 4
SP
SP
CH(1)
SP-Y1
SP
CH(2)
SPK1
SP
SPK2
SPK3
SPK4
LA8
*
per output / total
2 / 8
**
2 / 6
Electro-acoustical description
LA12X
*
per output / total
3 / 12
2 / 8
19