Rigging elements for stacked arrays
K2-JACK
K2-JACK is a set of two bars and four feet with screw jacks and hand wheels. K2-JACK can be tted onto K3-CHARIOT to
improve stability or correct oor discrepancies.
During transportation, make sure the bolts are tightened.
K2-JACK cannot be stored on K3-CHARIOT.
storage position
With K2-JACK, the site angle of the K3 array can be adjusted between -23° and +13°.
K3 owner's manual (EN) version 1.0
bolts (x4)
Rigging system description
hand wheels
locking handles
feet with screw jacks
position in use
29