N1913A/14A EPM Series Power Meters Performance Characteristics (Continued)
Settling time
1
Manual filter, 10-dB decreasing power step for normal and x2 modes (not across range switch points for E-Series and N8480 Series
sensors)�
Table 3. Settling time
Number of averages
Settling time with E-Series sensors (s)
Normal mode
x2 mode
Settling time with N8480 Series sensors (s)
Normal mode
x2 mode
Settling time with 8480 Series sensors (s)
Normal mode
x2 mode
E-Series sensors In FAST mode (using free run trigger), within the range –50 dBm to +17 dBm, for a 10 dB decreasing power step, the
settling time is:
– N1913A: 10 ms
2
– N1914A: 20 ms
2
1� Settling time: 0 to 99% settled readings over the GPIB�
2� When a power step crosses through the sensor's auto-range switch point, add 25 ms� Refer to the relevant sensor manual for switch point information�