Kollmorgen S300 Translation Of The Original Manual page 36

S300-S400-S600-S700 PROFIBUS | 5 Parameter channel (PKW)
Index
Short description
Unit
Access
Data type
Value range
Default value
EEPROM
Index
Short description
Unit
Access
Data type
Value range
Default value
EEPROM
The following object formats are possible:
0. Function (no parameters – write only)
1. Function (32-Bit parameter)
2. Function (32-Bit parameter with weighting 3)
3. 8-Bit integer
4. 8-Bit unsigned integer
5. 16-Bit integer
6. 16-Bit unsigned integer
7. 32-Bit integer
8. 32-Bit unsigned integer
9. 32-Bit integer (weighting 3)
Index
Short description
Unit
Access
Data type
Value range
Default value
EEPROM
0x00010000 when altered, the variable has to be saved and the amplifier reset
0x00020000 variable will be saved in the serial EEPROM
0x00200000 variable is read-only, must not be written via PROFIBUS
Index
Short description
Unit
Access
Data type
Value range
Default value
EEPROM
Objects with format 0 (index 5) must not be accessed reading (response identification = 1).
36 Kollmorgen | kdn.kollmorgen.com | December 2019
4/14h/ 24h depending on the object no. (see above)
read default value
see corresponding ASCII-command
Read only
see corresponding ASCII-command
see corresponding ASCII-command
—-
—-
5/15h/ 25h depending on the object no. (see above)
read object format
—
Read only
see corresponding ASCII-command
see corresponding ASCII-command
—-
—-
6/16h/ 26h depending on the object no. (see above)
read object control data
—
Read only
UNSIGNED32
32
0 ... 2 – 1
—-
—-
7/17h/ 27h and 8/18h/ 28h
reserved
—-
Read only
UNSIGNED32
32
0 ... 2 - 1
—-
—-