Philips HB185/01 User Manual page 8

EngliSH
8
Note: If your skin feels slightly taut after tanning, you can apply a moisturising cream.
Duration of the
tanning session in
minutes
1st session
break of at least 48
hours
2nd session
3rd session
4th session
5th session
6th session
7th session
8th session
9th session
10th session
using the appliance
1 Place the appliance on a solid, flat and stable surface.
The appliance can be placed in two positions: upright and tilted (Fig. 1).
,
 Put the plug in the wall socket.
 Consult the table in these instructions for use to determine the appropriate duration of the
session.
4 Put on the protective goggles supplied.
5 Set the timer to the appropriate tanning time (Fig. ).
6 Position yourself in front of the face tanner.
The distance between your face and the tanning lamps should be 10 cm (Fig. ).
,
When the set time has elapsed, the timer will automatically switch off the appliance.
7 Always unplug the appliance after use.
8 Keep track of the overall number of sessions you have had on a piece of paper or by means
of the memory knobs.
Protective goggles
The protective goggles should only be used when tanning with a Philips tanning appliance. They
should not be used for other purposes.
The protective goggles comply with protection class II according to directive 89/686/EEC.
Cleaning
Always unplug the appliance and let it cool down before cleaning it.
You can clean the outside of the appliance with a damp cloth. Make sure that no water runs
,
into the appliance.
for persons with very
sensitive skin
6
break of at least 48
hours
10
10
10
10
10
10
10
10
10
for persons with
normal sensitive skin
6
break of at least 48
hours
15-20
15-20
15-20
15-20
15-20
15-20
15-20
15-20
15-20
for persons with less
sensitive skin
6
break of at least 48
hours
20-25
20-25
20-25
20-25
20-25
20-25
20-25
20-25
20-25