Paradyne Hotwire 8775 Installation Instructions Manual page 12

Selecting the 8775 Card from the DSLAM
"
12
From the Hotwire Chassis Main Menu, select Card Selection to display the cards
present in the chassis by type and slot number. The Card Selection screen also
displays general and interface status for each card.
Procedure
To access the 8775 Termination Unit Main Menu screen:
1. From the Hotwire Chassis Main Menu screen, select Card Selection.
The Card Selection screen appears.
2. Verify that the card you want to access appears on the Card Selection
screen. If the card does not appear, check the configuration of the MCC.
3. At the Goto Card (M for MCC or slot# for DSL): prompt, enter the
number of the slot, then press Enter. For example, if you want to configure
the card in Slot 4, enter 4.
The 8775 Termination Unit Main Menu appears.
March 1999 8775-A2-GZ40-10