1. Important information
1.1 How to use this manual
This manual is intended for qualified personnel working in electrical
engineering and electronics!
Always keep this manual within easy reach for future reference.
To make it easier for you to understand and revisit certain sections in this manual, we
have used symbols to identify important instructions and information. The meaning of
these symbols is explained below:
This signal word indicates that there is a high risk of danger that will re-
sult in electrocution or serious injury if not avoided.
DANGER
This signal word indicates a medium risk of danger that can lead to
death or serious injury if not avoided.
WARNING
This signal word indicates a low level risk that can result in minor or mo-
derate injury or damage to property if not avoided.
CAUTION
This symbol denotes information intended to assist the user in making
optimum use of the product.
5
Important information
1.2 Technical support
For commissioning and troubleshooting Bender offers you:
1.2.1 First level support
Technical support by phone or e-mail for all Bender products
• Questions concerning specific customer applications
• Commissioning
• Troubleshooting
+49 6401 807-760*
Telephone:
+49 6401 807-259
Fax:
In Germany only: 0700BenderHelp (Tel. and Fax)
support@bender-service.de
E-mail:
1.2.2 Repair service
Repair, calibration, update and replacement service for Bender products
• Repairing, calibrating, testing and analysing Bender products
• Hardware and software update for Bender devices
• Delivery of replacement devices in the event of faulty or incorrectly delivered
Bender devices
• Extended guarantee for Bender devices, which includes an in-house repair service or
replacement devices at no extra cost
+49 6401 807-780** (technical issues)
Telephone:
+49 6401 807-784**, -785** (sales)
+49 6401 807-789
Fax:
repair@bender-service.de
E-mail:
Please send the devices for repair to the following address:
Bender GmbH, Repair-Service,
Londorfer Strasse 65,
35305 Grünberg
iso1685P_D00003_01_M_XXEN / 12.2016
Need help?
Do you have a question about the ISOMETER ISO1685 Series and is the answer not in the manual?