Recipes - Philips HD4768/00 User Manual

Problem
The Preset/Clock
light does not go
on when I set the
timer.
The rice is
scorched.
The rice cooker
does not switch to
keep-warm mode
automatically.
The yoghurt is not
firm enough or
does not form at
all.
Error message E5
appears on the
display.

Recipes

Pasta
Serves 3-4 persons
Ingredients:
- 250g pasta (penne or macaroni)
- 500ml pasta sauce
- 700ml water
1 Put the pasta and pasta sauce in the inner pot and add water up to the water level for pasta.
Press the Congee/Pasta button and select the Pasta submenu. Set the cooking time to 20
minutes for macaroni or 30 minutes for penne. Then press the Cook/OK button to cook.
2 When the pasta cooking process is finished, sprinkle some pepper or cheese on top and
serve the pasta hot.
yoghurt
Serves 4 persons
Ingredients:
- 500ml milk
- 100ml plain live yoghurt
1 Place the yoghurt in room temperature a few minutes before cooking to warm up the
yoghurt culture. Warm the milk to around 40°C. Mix the yoghurt with the warm milk rapidly
in a separate big pot and pour the mixture into the individual yoghurt pots. Cover the pots
with the lids.
Possible cause
The light is defective.
You have not rinsed the rice
properly.
You have been reheating
food, baking a cake, cooking
rice with soup, cooking pasta
or steaming food.
The temperature control is
defective.
You have warmed the milk
to over 40°C, which has
destroyed the bacteria in
the yoghurt culture.
There has been a power
failure during cooking or in
the keep-warm mode that
lasted longer than 2 hours.
Solution
Take the appliance to your Philips dealer or
a service centre authorised by Philips.
Rinse the rice until the water runs clear.
The automatic keep-warm mode only works
in the rice, congee, soup, stew and dessert
menus.
Take the appliance to your Philips dealer or
a service centre authorised by Philips.
Do not warm the milk too long in order to
keep the bacteria alive in the yoghurt
culture. For smoother and firmer yoghurt,
you can add 60g milk powder to the milk
and then warm it.
When the power supply resumes, press the
Stop/Cancel button to reset the appliance.
EnglisH
25