Operation And Use; Before Commissioning; Notes About Operation - Wacker Neuson BPU 5545 Operator's Manual

9 Operation and use

9 Operation and use
WARNING
Improper handling may result in injury or serious material damage.

9.1

Before commissioning

9.1.1 Inspection before commissioning
Check the machine and components for damage. In the event of visible damage, do not operate the

machine and immediately contact a Wacker Neuson dealer.
Ensure that loose packaging material has been removed from the machine.

Check fuel level.

Check the engine oil level.

Check air cleaner.

Check hydraulic oil level.

Check the fuel lines for leak tightness.

Check to ensure the screwed connections are firmly seated.

NOTICE
Perform control procedures according to the Maintenance chapter. If necessary, top off
missing fuel, lubricants and coolants, see chapterTechnical Data.
9.1.2 Set center pole
1
2
Item Designation
1 Center pole
The optimal working height of the center pole can be set by adjusting the threaded spindle.
9.2

Notes about operation

WARNING
Danger of tipping
There is a serious risk of injury from slipping or tipping over of the machine.
Near edges, at least 2/3 of the machine must be on a load-bearing surface.

WARNING
Health hazard from exhaust fumes

22
Please read and follow all safety instructions in this operator's manual.
Turn off the machine and lift it back onto a load-bearing surface.
The exhaust fumes of this engine contain chemicals, which the state of California
knows can cause cancer, birth defects or other reproductive damage.
Item Designation
2 Threaded spindle
100_0202_op_0015.fm