Replacing Pneumatic Cylinder On Vertical Dispense Valve - Conair TrueBlend SB-4 User Manual

5 - 1 0 l M a i n t e n a n c e
R e p l a c i n g P n e u m a t i c C y l i n d e r o n
Ve r t i c a l D i s p e n s e Va l v e A s s e m b l y
1
Open the cover [3].
2
Remove the cylinder cover [4].
3
Pull the hoses [1] from the cylinder.
4
Remove the nut [2].
5
Remove the complete unit.
6
Reassemble in reverse order. Note the stroke when installing, otherwise the desired
throughput may not be reached.
✐
NOTE: When disassembling the cylinder/valve assembly, measure the length of the complete
assembly (Dim A) and record. This assembly length must be maintained. When reassembling,
adjust the length to this value. Loc-tite™ all fittings when reassembling.