Starting The Blending Process; S T A R T I N G T H E B L E N D I N G P R O C E S S; Stopping The Blending Process; S T O P P I N G T H E B L E N D I N G P R O C E S S - Conair TrueBlend SB-4 User Manual

L o a d i n g M a t e r i a l i n t o t h e Tr u e B l e n d
S B - 4
Before the blender can be operated, material must be loaded into the TrueBlend SB-4 mate-
rial hoppers.

S t a r t i n g t h e B l e n d i n g P r o c e s s

1
Turn power on to the blender. The controller display will come on and the blender
Home screen will be displayed.
2
Press the 'Recipe' button. The TrueBlend SB-4 Recipe screen will appear.
3
Enter the recipe percentages for each ingredient.
4
Press the "Options" button and select the material type for each component.
5
Press the 'Automatic' button to start the blending process automatically with the
new set recipe values and Options.
for more detailed information.
✐
NOTE: The recipe is validated before the blender begins processing it as the set recipe. If there is
a problem with the recipe, a [Recipe Alarms] button will be presented. Correct the errors
and press the [Commit] button again.

S t o p p i n g t h e B l e n d i n g P r o c e s s

1
Press the button 'Stop' to stop the metering and mixing process.
2
A window will be presented asking whether the current batch should be allowed to
finish before stopping, or should the blender stopped immediately without complet-
ing the batch.
3
Enter the appropriate stop mode or press 'Back' to not stop the blender.

S e c u r i t y S e t t i n g s

Security levels dictate what data is accessible by the user. On each screen page in the
upper left corner, a numeric box indicates the current level of security.
The security number level, color, and default passcodes are as follows:
•
0 – Green - Guest – minimum security level
•
1 – Yellow - Operator – Passcode 3333
•
2 – Orange - Setup – Passcode 2222
•
3 – Red - Service – maximum security level - Passcode 1111
The passcodes for each level can be changed in the 'Setup' – 'Panel' – 'Security' screen.
Refer to the Operation section entitled, Menus-Security
user-defined passcodes and setting up the security system.
See the Operation section entitled, Menus-Recipes
for more information regarding
O p e r a t i o n l 4 - 3