Included Safety Features; I N Cl U D E D S A F E T Y Fe A T U R E S - Conair TrueBlend SB-4 User Manual

1 - 4 l I n t r o d u c t i o n
CA U T I O N : S l i d e g a t e h a z a r d
Never use your fingers to move a sticking slide gate under the mix chamber.
CA U T I O N : M i s u s e h a z a r d
This blender must be exclusively used for metering and mixing free-flowing (as per DIN
ISO 3435) plastic granulate and additives. A total of four to six different materials can be
metered and mixed in the blender, depending on model.
The following must not be metered and mixed:
•
Foods of all types (unit does not meet hygienic standards).
•
Highly abrasive materials, such as stones, sand (increased wear of unit components).
•
Poorly free flowing, sticky materials (airtight seal by the pneumatic cylinder is adversely
affected).
•
Liquids and powders (airtight seal by the pneumatic cylinder is not possible).

I n cl u d e d S a f e t y Fe a t u r e s

S a f e t y I n t e r l o c k S w i t c h
The access door is equipped with a safety interlock switch that prevents the mix motor
from running and the slide valves from operating. Do NOT defeat this safety switch.
H o p p e r F i n g e r G u a r d s
Finger guards are fitted into each hopper compartment. Do NOT reach through these
guards. Do NOT use your fingers to clear an obstruction below these guards. Do NOT
remove these guards.