Operating Screens; O P E R A T I N G S C R E E N S - Conair TrueBlend SB-4 User Manual

Contact Conair Parts
1 800 458 1960
From outside of the United
States, call:
814 437 6861
4 - 8 l O p e r a t i o n

O p e r a t i n g S c r e e n s

Initial Page
When the system is first powered on, the touch screen will go through the manufacturer's
boot up process. Upon completion, the TrueBlend SB-4 code will display the 'Initializing
System' screen, indicating the software is loading the configuration of the system setting
the initial operating parameters. Do not turn off power during the time this page is shown.
In the lower right hand corner of the screen, the current Software Version is displayed.
There is firmware protection built into the system. Powering the system on for the first
time with new software requires a 'software licensing' code to be entered in order to contin-
ue the boot process. For new installations, this will have been completed by Conair before
shipment. The software license codes can be viewed on the <Setup> - <Maintenance> -
<License> screen.
Contact Conair technical support if the system does not boot. The system 'Station
Identifier' code must be presented to obtain a new license code. The 'Station Identifier'
code can be found on the license entry popup window.
(Continued)