Vinten Vision Pozi-Loc Maintenance Manual page 87

Contents
IIdentification
10 Turn the clamp knob
11 Using a suitable instrument, such as a flat-bladed screwdriver, carefully remove the knob cap (1).
12 Remove the retaining screw
Earlier clamps
13 Earlier clamps have a smooth shaft
used on these screws
Later clamps
14 Later clamps have a groove machined in the shaft
grubscrew, retained by a locking thread insert.
Tripod Type
75 mm Aluminium
75 mm Carbon fibre
100 mm Aluminium
100 mm Carbon fibre
100 mm Aluminium EFP
100 mm Carbon fibre EFP 3884-3
150 mm Aluminium EFP
150 mm Carbon fibre EFP 3881-3
75 mm Baby Legs
100 mm Baby Legs
150 mm Baby Legs
(4) counter-clockwise to the 'OFF' position.
(2) and washer (3), and pull off the clamp knob (4).
(5) and are fitted with locking and adjusting grubscrews. Loctite is
First
Page
Part No. Serial No.
3774-3 03757
3776-3 02574
3770-3 03783
3772-3 04677
3883-3 00112
00108
3880-3 00873
01175
3779-3 00206
3778-3 00223
3882-3 00114
(5) and are fitted with a single, longer, adjusting
Previous Next Previous
Page Page View
87