Table of Contents
Advertisement
Contents
Assembly - current clamps
6
Install the bottom clamp as follows:
6.1
Apply white bearing grease to the cam surface of the cam moulding
6.2
Install the washer (6), the bottom clamp shaft (7), the cam moulding
assembly
(9)
in the bottom clamp moulding (11).
7
Install the oval leg as follows:
7.1
Insert the oval leg
of the lower clamp assembly (9).
7.2
Position the T-piece buffer
(2).
7.3
Refit the screw cover (1).
8
Install the clamp knob as follows:
8.1
Position the clamp knob
to the 'OFF' position.
8.2
Install the grubscrew
9
Adjust the clamp
Dismantling - earlier clamps
10
Remove the clamp knob as follows:
10.1 Turn the clamp knob
10.2 Using a suitable instrument, such as a flat-bladed screwdriver, carefully remove the knob cap
(15).
10.3 Remove the screw (14), washer
10.4 Remove the locking grubscrew
11
Remove the oval leg as follows:
11.1 Carefully remove the screw cover (1).
11.2 Remove the screw
(10).
11.3 Pull the oval leg downwards out of the bottom clamp.
12
Remove the bottom clamp as follows:
12.1 Remove the lower clamp assembly (9), the cam moulding (8), the bottom clamp shaft
the washer
(6)
from the bottom clamp moulding (11).
(10)
in the bottom clamp moulding (11), taking care not to damage the surface
(4)
and T-piece cap
(12)
on the bottom clamp shaft
(5)
in the bottom clamp shaft (7).
See "Adjusting 'Pozi-Loc' leg clamps" on page 89.
(12)
counter-clockwise to the 'OFF' position.
(13)
(18)
(2)
securing the T-piece cap
(3)
on the oval leg tube
(7)
and turn the knob counter-clockwise
and clamp knob (12).
and adjusting grubscrew (17).
(3)
and T-piece buffer
First
Previous
Next
Page
Page
Page
(8)
and the washer (6).
(8)
and the lower clamp
(10)
and secure with screw
(4)
to the oval leg tube
(16)
Previous
View
and
100
Hide quick links:
Advertisement
Table of Contents
