Table of Contents
Advertisement
Document No. 125-1009
Installation Instructions
February 10, 2020
Set-up Wizard
When unit is powered up for the first time, WIZARD
displays. This tool is used to program the basic
system parameters. Additional parameters can be
accessed directly via Installer/Expert Set-up menus.
NOTE: The thermostat will not start the control
sequence until Set-up Wizard is complete.
1.
Press WIZARD to access the menu.
NOTE:
Press left [] and right [] arrows to select
parameters. Press + or – to change
parameter settings.
2.
After completing all Wizard parameters, press
Confirm to save and complete.
3.
INSTALLER displays.
4.
Press INSTALLER to access Installer Menu.
a. Enter values obtained from the Energy
Management System Network Plan for the
600 Series BACnet Configuration
Parameters. See Table 8.
NOTE:
Required to communicate with the Energy
Management System.
5.
If setup is complete, press the Settings icon [
] to exit the Set-up Wizard. If further setup is
needed, continue to Step 6.
6.
Select and modify additional parameters. See
Table 3 through Table 9 for all parameter
descriptions. Use the space provided in Table
16 to record any modified parameter settings.
7.
Press the Settings icon [
exit setup.
Programming Temperature Setpoints
1.
Touch the center of the Home screen to access
the room temperature screen. Use the left []
and right [] arrows adjacent to the text line to
display the room temperature and humidity.
2.
Touch the Setpoint icon [
access room temperature and humidity
setpoints.
NOTE:
Only the setpoints in the current mode
display and can be modified. For instance, if
the thermostat is in heating mode, only the
heating setpoint displays and can be
modified. If the thermostat is in AUTO
mode, both the heating and cooling
setpoints will be displayed and can be
modified.
Page 6 of 20
] when finished to
] of the screen to
3.
Use the left [] and right [] arrows to access
the different setpoints, and the + and – icons to
adjust the setpoints.
4.
Touch the center of the screen to exit Setpoint
Programming.
NOTE:
If the screen is not touched for 10 seconds,
the unit returns to the Home screen.
Programming Time and Date
1.
Touch the center of the Home screen.
2.
Press the Settings icon [
displays.
3.
Use the left [] and right [] arrows to access
the Time menu. Press TIME. Press the two-digit
hour display to change the hour, or press the
two-digit minute display to change the minutes.
Press the left arrow to decrease the value, and
the right arrow to increase the value.
4.
Press the Settings icon [
5.
Use the left [] and right [] arrows to access
the Date menu. Press DATE. Use the arrows to
select the month and year; use +/- to set the
date.
6.
Press the Settings icon [
Installer Menu
1.
Touch the center of the Home screen.
2.
Press the Settings icon [
displays.
3.
Press the left arrow [].
4.
Press INSTALLER.
5.
Using the lower left [] and right [] arrows,
enter the password.
6.
Press PASSWORD to accept the password.
NOTE:
The Installer Level default password is
00:00
7.
Press the Settings icon [
changes and return the unit to the Home
screen.
NOTE:
If you do not provide input, the thermostat
will automatically exit the Installer menu and
resume normal system control after five
minutes.
]. SCHEDULER
] to save.
] to save.
]. SCHEDULER
] to accept
Siemens Industry, Inc.
Hide quick links:
Advertisement
Table of Contents
