Setup Wizard - Siemens EcoView 97-004 Installation Instructions Manual

Document No. 129-906
Installation Instructions
July 20, 2016
Set-Up Wizard
When the unit is powered up for the first time, the
Set-Up WIZARD displays. This tool is used to
program the controller/thermostat.
NOTE: The thermostat will not start the control
sequence until the Set-Up Wizard is
complete.
1. Press WIZARD to access the menu.
2. Press + or – to change parameter settings, and
then use left and right arrows to select the
additional parameters.
3. After verifying all parameters, press Confirm to
save and complete.
4. INSTALLER displays. If setup is complete,
press the Settings [ ] icon to exit the Set-Up
Wizard. If further setup is needed, continue to
Step 5.
5. Press INSTALLER to access the Installer Menu
and more detailed setup. See Table 3 through
Table 9 for all parameter descriptions.
6. Press the Settings [ ] icon when finished to
exit setup.
Programming Temperature Setpoints
1. Touch the center of the Home screen to access
the room temperature screen. Use the left and
right arrows adjacent to the text line to display
the room temperature and humidity.
2. Touch the Setpoint [
access the room temperature and humidity
setpoints.
NOTE: Only the setpoints in the current mode
display and can be modified. For
instance, if the thermostat is in heating
mode, only the heating setpoint
displays and can be modified. If the
thermostat is in AUTO mode, both the
heating and cooling setpoints will be
displayed and can be modified.
3. Use the left [ï] and right [ð] arrows to access
the different setpoints, and the + and – icons to
adjust the setpoints.
4. Touch the center of the screen to exit Setpoint
Programming.
NOTE: If the screen is not touched for 30
seconds, the unit returns to the Home
screen.
Page 6 of 18
]icon of the screen to
Programming Time and Date
1. Touch the center of the Home screen.
2. Press the Settings [ ] icon. SCHEDULER
displays.
3. Use the left [ï] and right [ð] arrows to access
the Time menu. Press TIME. Press the two-digit
hour display to change the hour, or press the
two-digit minute display to change the minutes.
Press the left arrow [ï] to decrease the value,
and the right arrow [ð] to increase the value.
4. Press the Settings [ ] icon to save.
5. Use the left [ï] and right [ð] arrows to access
the Date menu. Press DATE. Use the arrows to
select the month and year; use +/- to set the
date.
6. Press the Settings [ ] icon to save.
Installer Menu
1. Touch the center of the Home screen.
2. Press the Settings [ ] icon. SCHEDULER
displays.
3. Press the left arrow [ï].
4. Press INSTALLER.
5. Using the lower left [ï] and right [ð] arrows,
enter the password.
6. Press PASSWORD to accept the password.
NOTE: The Installer Level default password is
00:00.
Press the Settings [ ] icon to accept changes and
return the unit to the Home screen.
NOTE: If you do not provide input, the thermostat
will automatically exit the Installer menu and
resume normal system control after five
minutes.
Programming the Schedule
1. Touch the center of the Home screen.
2. Press the Settings [ ]. Icon. SCHEDULER
displays.
3. Press SCHEDULER.
4. Use the left [ï] and right [ð] arrows to select
the day. Press the day to select.
5. Use the + and – icons to set the temperature
setpoints.
Siemens Industry, Inc.