Input Gain; Midi - Korg Pearl eMerge MDL1 Owner's Manual

INPUT GAIN

This sets the input gain for the AUX In jack and USB audio.
• Aux In .......................................................................... -20.0 ... +00.0 ... +10.0 db (+/-0.5 db)
This adjusts the input gain for the AUX IN jack.
• USB Audio In ................................................................. -20.0 ... +00.0 ... +10.0 db (+/-0.5 db)
Adjusts the input gain for the USB audio.
[STORE] function button
Press the [STORE] function button to store the settings. Press the EXIT button to cancel
the settings.

MIDI

Configures the settings for transmitting and receiving MIDI signals.
You can set the tempo clock source, MIDI channel, enable/disable each message and set
the note number (0–127) to output for each pad.
• Clock In ......................................................................................................Internal, External
Tip:
External clocks can only be received via USB-MIDI.
• MIDI Channel ..............................................................................................................01...16
Specifies the MIDI channel of the module.
If you want to transmit or receive program changes set the MIDI channel to match the
MIDI channel of the connected MIDI device.
• Transmit Program Change ........................................................................................... Off, On
Specifies which Program changes are not transmitted.
• Receive Program Change ............................................................................................. Off, On
Specifies which Program changes are not received.
Tip:
Program changes can only be received via USB-MIDI.
• Hi-Hat Pedal CC ....................................................................................................... 000...119
Sets the CC (control change) number to be outputted when operating the hi-hat pedal.
• Transmit Hi-Hat Pedal CC ............................................................................................. Off, On
Turns CC data output off/on for when the hi-hat pedal is operated.
• Hi-Hat Pedal Close Point ......................................................................................... 000...127
Sets the switch position between the hi-hat close note and hi-hat open note for the hi-hat
pedal.
- 44 -
Configuration Guide