Drum Kit Parameter Edit Menu - Korg Pearl eMerge MDL1 Owner's Manual

Drum kit parameter edit menu

The parameters that can be edited using the drum kit parameter edit menu are shown below.
Note:
Depending on the parameter, increasing this value may cause distortion or noise.
Pad Select .......................................................................................................
Sets the pad to edit.
Selectable pads:
Snare, Tom1, Tom1Rim, Tom2, Tom2Rim, Tom3, Tom3Rim, Kick, Hi-Hat, Crash, Ride,
Tom4/Acc1, Acc2, Acc3
Inst Level.........................................................................................000...200%
Sets the volume of the instruments for the currently selected pad.
Inst Transpose ................................................................................... -12...+12
Adjusts the pitch of the currently selected pad in semitones.
Note:
This parameter may not have an effect in certain ranges for certain instruments.
Inst Tune ........................................................................................-100...+100
Adjusts the pitch of the currently selected pad in cents.
Inst Decay.......................................................................................-100...+100
Sets the decay time (the length of time it takes for the sound to fade out) for the currently
selected pad.
Note:
This parameter may not have an effect in certain ranges for certain instruments.
Inst Pan .........................................................................-50(L)...0(CNT)...+50(R)
Sets the panning position (the left-right volume balance) for the currently selected pad.
Comp Edit
Sets the COMP (compressor) parameters for the currently selected pad. To access the
parameters below, select "Comp Edit" using the dial and then press the ENTER button.
• Comp On/Off ............................................................................................................... Off, On
Enables/disables the COMP effect.
• Sens ...................................................................................................................... 000...100
Adjusts the sensitivity of the COMP.
• Attack .................................................................................................................... 000...100
Adjusts the attack time of the COMP.
- 19 -
Configuration Guide