Error Messages - Korg Pearl eMerge MDL1 Owner's Manual

Error messages

Error messages
Store Error
Import Error
Export Error
Load Error
Copy Error
Move Error
Delete Error
Setup Error
Data Load Error
PCM Load Error
Song Setup Error
Memory Full
Same name file exists
Can not record
Now recording
Already assigned
Invalid Name
Same Number
No Data File Exists
Calibration Error
Format Error
External Drive Full
Memory Protected
Can not make data folder
Cause of error and how to solve
An error has occurred when writing to or reading from a file in internal memory or on a USB
flash drive.
If errors occur frequently, use a different USB flash drive. Contact our service representative if
you encounter errors after several unsuccessful tries of writing to or reading from internal
memory.
An error has occurred when loading the parameter data used by the system.
Turn the power off and on again. If the error is still present after cycling the power, contact our
service representative.
An error occurred when loading the PCM data used in a drum kit.
If errors occur frequently, contact our service representative.
An error occurred when making song playback settings.
Check the contents of the project and the WAV file registered.
There is no more recording time available.
Export the WAV files stored in internal memory to USB flash drive, and then delete them.
There is already a file with the same name.
Use a different filename, and store the file again.
The instrument is not yet ready to record.
You cannot exit the TRAINING page because the unit is still recording.
Stop recording.
Since the file has already been registered as a playback file, you cannot delete it.
Deregister the file as a playback file first, and then delete the file.
Renaming is disabled.
If you have not inputted any characters, input some characters and then perform the ENTRY
function.
The operation cannot be performed because the numbers are the same (during "Exchange
Internal Kit").
Select a different number to do this.
There are no user drum kits or metronome project files stored on the USB flash drive.
Export the files before importing.
An error occurred during calibration.
Try calibrating again.
An error occurred when formatting the USB flash drive.
If an error still occurs after trying this several times, use a different USB flash drive.
The data file could not be created or stored, due to insufficient memory remaining on the USB
flash drive.
Delete any files on the USB flash drive that you do not need.
The memory protect feature is on.
Turn the memory protect feature off.
A folder could not be created on the USB flash drive to store the data file.
Make sure that there are no other files or folders with the same name on your USB flash drive.
- 58 -
Appendix