Korg Pearl eMerge MDL1 Owner's Manual page 9

The cable marked "KICK" that is connected to the KICK (kick drum) supplies the
power used for lighting the LED. When connecting this cable to other products
besides the specified pad, set Trigger Type to "OTHER" beforehand, and be sure to
turn off the power before connecting. Use caution, as the unit may malfunction if
you make the wrong settings. (→ p.38 "TRIGGER PAD")
The cable marked "HHC" that is connected to the hi-hat is only to be used for the
EM-14HH, and supplies power for the sensor. Do not connect the cable marked
"HHC" to any other products besides the specified pad. Use caution, as making the
incorrect connection may cause the unit to malfunction.
4. Connect the included AC adapter, a powered monitor speaker, stereo amp, or mixer to
this module.
(→ p.10 "Connecting the included AC adapter")
(→ p.10 "Connecting audio devices")
Note:
When assembling this drum set for the first time or reassembling it, calibrate the
hi-hat. (→ p.40 "HI-HAT CALIBRATION")
- 9 -
Preparations