Festo MPA-FB Series Manual page 172

A. Technical appendix
General information
Materials
Valve, sub−bases, supply plates and end plates
Electronic module
Multipin connection
Seals
Cover of the proportional pressure regulator
Weights
Pneumatic interface or multipin sub−base
(with exhaust plate / large surface−mounted
silencer)
CPI sub−base (with exhaust plate /
large surface−mounted silenecer)
AS−Interface (with exhaust plate /
large surface−mounted silenecer)
Per sub−base (with seal, electronic module,
electric linking, label supports, screws)
Per pneumatic supply plate (with seal, electric
linking, screws, exhaust plate /
large surface−mounted silencer)
Per electric supply plate (with seal, electric
linking, screws)
Per pressure sensor plate
Per proportional pressure regulator with
sub−base and electronic module)
Per complete CPX module
Left−hand end plate (CPX terminal)
Right−hand end plate (MPA−S)
Per valve
Per cover plate
Per pressure regulator plate
Tab. A/1: General technical data
A−4
Al
POM/polycarbonate
Polyamide 6
Elastomer, NBR
PAXMD6−GF50/gr−P; PA6−GB20, GF10/gr−P
324 g / 315 g
427 g / 418 g
396 g / 360 g
185 g (4 valve locations)
120 g / 111 g
200 g
200 g
approx. 575 g
approx. 210 g
approx. 80 g
55 g
MPA1
approx. 56 g
24 g
100 g
MPA2
approx. 100 g
44 g
180 g
Festo P.BE−MPA−EN en 0802c