NGRM500 Intended use The NGRM500 is only intended for use in high-resistance grounded systems. In these systems, the NGRM500 monitors • the current through the neutral-grounding resistor (NGR), • the voltage between the star point of the transformer and earth (voltage drop across the NGR), •...
NGRM500 Connection X1 Pulser IN Reset IN Test IN Modbus RTU (A) Modbus RTU (B) Ground Analogue output Open Collector: Pulser OUT Open Collector: System health Output for supply of external relays (+24 V, max. 100 mA) Star configuration Circuit breaker (for tripping systems) The "N"...
Page 4
W1-S35…W5-S210 Bender CT W...AB W... AN420 CTUB103 W...S... 24 V S1(k) S2(l) NGRM500: 50 mA NGRM500: 50 mA NGRM500: 5 A CT: Terminal k NGRM500: C NGRM500: C NGRM500: C CT: Terminal l AC/DC Measuring current transformer connection (W…AB) 50 mm 1.97 in...
NGRM500 Menu structure 1. Data meas. values , Method, R NGR rel sense, rms rel rms rel, fund fund rel fund fund rel, harm harm rel harm harm rel, 2. Harmonics 3. History History, Delete 4. Pulser Pulser, t Impuls 5.
Page 6
NGRM500 Recommended minimum value R (tripping level 50 %) Temperature range –40…+70 °C, field calibration at 25 °C (Values shown in brackets: Limited temperature range 0…+40 °C, field calibration at 25 °C) CD1000/CD1000-2 CD1000-2 CD5000 CD14400 CD25000 400 V 600 V...
NGRM500 Language (8.2) Select RNGR nom (8.8) Date (8.3) CT primary (8.9) Time (8.4) CT secondary (8.10) Usys L-L (8.5) System voltage CT connection (8.11) 50 mA or 5 A Frequency (8.6) 50 or 60 Hz Field calibration (8.12) Start or do not start INGR nom (8.7)
Bender GmbH & Co. KG Londorfer Straße 65 • 35305 Grünberg • Germany 800.243.2438 / 905.602.9990 • info@bender-ca.com Tel.: +49 6401 807-0 • info@bender.de • www.bender.de www.bender-ca.com USA, Mexico, Central America • Exton PA, USA South America • Santiago de Chile 800.356.4266 / 610.383.9200 •...