Avaya Virtual Services Platform 9000 Series Installation Manual page 35

Use the data in the following table to understand the output for the show sys-info command
on the Virtual Services Platform 9010.
FRONT zone:
For the 9010 module, the
front zone consists of two fan
trays with four fans in each
tray, which cool the CP and I/
O modules.
REAR zone:
For Virtual Services Platform
9010, no rear fan controllers
exist.
Note:
For VSP 9012, rear fan
controllers exist and the
output displays different
values.
Fan Info:
Installation — Chassis
FRONT FAN 2
FRONT FAN 2
Value
Mode:
Mode Status:
Highest Temperature
Mode:
Mode Status:
Highest Temperature
FAN 1
FAN 2
FRONT FAN 1 Unit 1
FRONT FAN 1 Unit 2
FRONT FAN 1 Unit 3
Virtual Services Platform 9010 chassis fundamentals
3 OK
4 OK
Each zone operates in either
normal mode or alarm
mode.
Normal Mode – All the fans
are healthy and no
temperatures exceed the
warning threshold.
Alarm Mode – Indicates fan
or fan tray failures or
temperature exceed the
warning threshold.
Specifies the highest
temperature reached in the
front zone.
For VSP 9010, no rear fan
zone exists, as a result,
Mode always displays as
NORMAL.
For VSP 9010, no rear fan
zone exists, as a result, the
Mode Status always displays
as Normal.
For VSP 9010, no rear fan
zone exists, as a result, the
temperature always reports
as 0 C.
Specifies the module type
under card type.
Specifies the module type
under card type.
Specifies the status of a fan
in the first cooling module.
Specifies the status of a fan
in the first cooling module.
Specifies the status of a fan
in the first cooling module.
Description
November 2013 35